The gyratory crusher as a kind of mining machine can break the coarse grains of the minerals and stones. Because of the features of high reduction rate, high yield and uniform mineral particles, the gyratory crusher is widely used in the industries of metallurgy, construction materials, chemical engineering and water and conservancy department.
(1) The structure is simple and reasonable, and the operation cost is low. Using the principle of stone beating, the wear is small.
The gyratory crusher runs driven by the motor and the movement of its eccentric bushing is completed through the belt pulley and the cone gear. As the eccentric bushing moves, the crushing cone device does the spinning and pendulum motion around the crushing center. In the crushing cavity, the materials are impacted, compressed and warped, and then the crushing cone and the fixed cone hit each other continuously, thus crushing the materials. Later the weight of the materials forces themselves to flow from the bottom of the crusher. Hyton supply the Wear and spare parts for gyratory crusher Mainly include - Head Assy ,Upper Shell ,Lower Shell, Bowl Assy , , Ecc Assy ,Counter Shaft Assy ,Counter Weght Assy , ,Feeder Assy ,Main Shaft ,Spider Liner ,Head Nut ,Spider Bearing ,Scraper ,Spider Cap ,Bronze Bushings and etc .
Hyton's products can be one good choice for customer who want get a replacement parts fro their crusher , Hyton's can supply the solution of the spare and wear parts mainly can suit the brands model under below :
Gyratory Crusher ：
Metso ：42-65 • 50-65 • 54-75 • 62-75 • 60-89 • 60-110
Sandvik: CG650 •CG820 •CG840 •CG850 •CG880
Main Features :
1.20 years experience ,all parts can suit the crusher well.
2.Hyton guarantee the 100% replace the original parts.
3.Certified by ISO system certification .
4. Large amount of stock for customer with competitive price.
5. OEM service available.
Hyton's Guarantee to all of our customers :
All of the castings finish must go along with the Metal Inspection and Dimension Inspection .
Hyton will always have the responsibility of all the products from hyton in the market , will service a "24+3"service rules (After get the request from customer , The after-service department of hyton myst supply the feedback solution within 24 hours ,and must get Consistent scheme amd solve the promblem within 3 days .
Hyton have a professional after-service team can promise service all over the world ,service including the Installation Guide ,Measurement at site ,Inspection and etc .
The gyratory crusher as a kind of mining machine can break the coarse grains of the minerals and stones. Because of the features of high reduction rate, high yield and uniform mineral particles, the gyratory crusher is widely used in the industries of metallurgy, construction materials, chemical engineering and water and conservancy department.
(1) The structure is simple and reasonable, and the operation cost is low. Using the principle of stone beating, the wear is small.
The gyratory crusher runs driven by the motor and the movement of its eccentric bushing is completed through the belt pulley and the cone gear. As the eccentric bushing moves, the crushing cone device does the spinning and pendulum motion around the crushing center. In the crushing cavity, the materials are impacted, compressed and warped, and then the crushing cone and the fixed cone hit each other continuously, thus crushing the materials. Later the weight of the materials forces themselves to flow from the bottom of the crusher. Hyton supply the Wear and spare parts for gyratory crusher Mainly include - Head Assy ,Upper Shell ,Lower Shell, Bowl Assy , , Ecc Assy ,Counter Shaft Assy ,Counter Weght Assy , ,Feeder Assy ,Main Shaft ,Spider Liner ,Head Nut ,Spider Bearing ,Scraper ,Spider Cap ,Bronze Bushings and etc .
Hyton's products can be one good choice for customer who want get a replacement parts fro their crusher , Hyton's can supply the solution of the spare and wear parts mainly can suit the brands model under below :
Gyratory Crusher ：
Metso ：42-65 • 50-65 • 54-75 • 62-75 • 60-89 • 60-110
Sandvik: CG650 •CG820 •CG840 •CG850 •CG880
Main Features :
1.20 years experience ,all parts can suit the crusher well.
2.Hyton guarantee the 100% replace the original parts.
3.Certified by ISO system certification .
4. Large amount of stock for customer with competitive price.
5. OEM service available.
Hyton's Guarantee to all of our customers :
All of the castings finish must go along with the Metal Inspection and Dimension Inspection .
Hyton will always have the responsibility of all the products from hyton in the market , will service a "24+3"service rules (After get the request from customer , The after-service department of hyton myst supply the feedback solution within 24 hours ,and must get Consistent scheme amd solve the promblem within 3 days .
Hyton have a professional after-service team can promise service all over the world ,service including the Installation Guide ,Measurement at site ,Inspection and etc .
